NEWS CENTER

Home page

The reasons and treatment methods for the failure of the intelligent toilet nozzle to discharge water

Category： News and information

2023-10-11 00:00

Smart toilets have brought convenience to our lives, but we also encounter various problems during use, one of which is the problem of the nozzle not producing water. In this issue, the editor will talk about the reasons and treatment methods for nozzle water failure.

1、 The reason why the intelligent toilet nozzle does not discharge water

智能马桶喷嘴不出水的原因和处理方法

1. Insufficient water pressure

Insufficient water pressure is one of the common causes of nozzle failure to produce water. When the pressure of the home water supply is lower than the pressure required for a smart toilet, the nozzle may not be able to spray water properly.

2. Inlet valve malfunction

The water inlet valve is a key component for controlling the water intake of smart toilets. If the inlet valve malfunctions, it may cause the toilet to be unable to supply water normally, thereby affecting the normal operation of the nozzle.

3. Waterway blockage

If the water circuit of the smart toilet is not cleaned for a long time, it may cause scale, impurities, etc. to block the water circuit, thereby preventing the nozzle from spraying water normally.

4. Control board malfunction

The control board of the smart toilet is responsible for controlling various functions, including the water spray function. If the control board malfunctions, it may cause the nozzle to malfunction.

2、 A treatment method for intelligent toilet nozzle not producing water

1. Adjust water pressure

When the water pressure is insufficient, you can try adjusting the household water supply pressure to meet the needs of smart toilets. If the water supply pressure cannot be adjusted, please contact the water supply company for a solution.

2. Check the inlet valve

The method to check if the inlet valve is faulty is to turn off the power, separate the inlet pipe from the toilet, and then open the water valve to observe the water flow. If the water flow is abnormal, it may be necessary to replace the inlet valve.

3. Clean the waterway

When cleaning the water circuit of the smart toilet, please be sure to follow the instructions in the product manual. Usually, it is necessary to turn off the power and water source, disassemble the toilet shell, and then clean the water circuit with a soft brush and warm water. If necessary, descaling agents can be used to assist in cleaning.

4. Check the control board

The inspection and maintenance of control board faults are complex, and it is recommended to seek professional assistance. You can contact the after-sales service of the smart toilet, or have nearby home appliance maintenance personnel come to inspect it. During the handling process, please pay attention to safety and avoid electric shock.
The above are the reasons and solutions for the problem of the smart toilet nozzle not leaking water. I hope this article can help you solve the problem of the nozzle not leaking water. If you have other home appliance maintenance and usage problems, you can also tell me.

Previous： No more!

Next： Is smart toilets worth buying? Advantages and disadvantages analysis, purchase strategy guide, and brand recommendation

RELATED INFORMATION

How to disassemble the smart toilet seat cover

To disassemble a smart toilet, turn off the power and water sources first Before opening the smart toilet lid, turn off both the power and tap water, and then use a screwdriver to unscrew it. The outer nut can be easily unscrewed, while the inner nut is close to the water tank and gropes in the direction of the water tank. Finally, all screws are unscrewed. Grasp both sides of the lid with your hand and gently pull it to remove it. 2. Find the nut, remove it with a moving hand, and then replace it with a new one. Ordinary nuts are difficult to find, some are in the open and some are in the dark. In a dark place, on the side near the sink in the toilet, usually installed next to the sink in the toilet, open the lid. Put your hand in and feel up and towards the water tank, you can feel it.

View Details